{"title":"Rings, Bases \u0026 Mounts","description":"\u003cp\u003eRings, bases, mounts and lens caps — filter by tube or ring diameter to match your scope.\u003c\/p\u003e","products":[{"product_id":"nightforce-base-rem-700-la-1pc-20-moa","title":"Nightforce Base - Rem 700 LA - 1pc - 20 MOA","description":"\u003cp\u003eThe detail that separates this from a generic rail is underneath, where you cannot see it: an integral recoil lug machined into the bottom of the base, engaging the receiver's own recoil slot. Without one, every bit of rearward force under recoil is resisted by the mounting screws in shear — six small fasteners doing a job they were never really designed for. With one, that load transfers into the receiver itself and the screws are left to do what they are good at, which is clamping. On a rifle that gets shot hard or carries a heavy scope, that is the difference between a mount that holds zero for years and one that creeps a quarter-minute at a time until you cannot explain your groups.\u003c\/p\u003e\u003cp\u003eThe 20 MOA taper is the other functional choice here. The rail is machined to tilt the scope nose-down relative to the bore, which spends none of your scope's internal elevation at zero and hands roughly twenty minutes of it back for dialing distance. If you have ever topped out a turret before you ran out of range, this is the fix, and it costs you nothing except a small amount of near-range adjustment you were not using.\u003c\/p\u003e\u003cp\u003eMachined from a single billet of steel to Mil-Std 1913 dimensions and contoured to match the receiver, so it sits flat and true rather than bridging high spots. The scalloped sides keep the rail out of the way of loading and extraction — a real complaint with tall rails on bolt guns, and one Nightforce designed around rather than ignored.\u003c\/p\u003e\u003cp\u003eThis is the Remington 700 long action version.\u003c\/p\u003e","brand":"Nightforce","offers":[{"title":"Default Title","offer_id":43019617173575,"sku":"A112","price":120.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8250\/4519\/files\/nightforce_scope_base_win_70_la__01768.jpg?v=1785358321"},{"product_id":"nightforce-base-rem-700-sa-1pc-20-moa","title":"Nightforce Base - Rem 700 SA - 1pc - 20 MOA","description":"\u003cp\u003eShort actions create a mounting problem that long actions do not: there is simply less receiver to work with, which means less rail, which means fewer places to put your rings. Get it wrong and you end up choosing between correct eye relief and rings that actually land on the rail — particularly with a long scope, or one with a large objective bell that has to clear the barrel.\u003c\/p\u003e\u003cp\u003eA one-piece base is the better answer to that problem than a two-piece set. Two separate bases can only be as aligned as the two sets of holes they bolt to, and factory receiver holes are not always in perfect agreement. A single piece of steel machined in one operation puts both ring surfaces in the same plane by definition, so your rings are not fighting each other and putting a bending load into the scope tube. It also gives you continuous rail between the two positions rather than two islands, so ring placement becomes a choice rather than a constraint.\u003c\/p\u003e\u003cp\u003eUnderneath, an integral recoil lug engages the receiver so recoil forces go into the action instead of shearing across the mounting screws. The rail carries a 20 MOA taper, which returns elevation travel to the scope for dialing distance rather than spending it holding zero.\u003c\/p\u003e\u003cp\u003eCut from one billet of steel to Mil-Std 1913 dimensions, contoured to the receiver, with scalloped sides so the rail stays clear of loading and extraction. This is the Remington 700 short action version — it will not fit a long action receiver.\u003c\/p\u003e","brand":"Nightforce","offers":[{"title":"Default Title","offer_id":43019617665095,"sku":"A115","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8250\/4519\/files\/nightforce_scope_base_win_70_la__29264.jpg?v=1785358322"},{"product_id":"nightforce-ultralite-ring-set-30mm","title":"Nightforce UltraLite Ring Set - 30mm","description":"\u003cp\u003eThe interesting engineering here is the mixed construction. The ring bodies are machined from 7075-T6 aluminum and hard anodized, which is where the weight saving comes from — but the crossbolts and jaws, the parts that actually clamp to the rail and take the load, are titanium. That combination is why Nightforce can claim steel-grade holding performance at roughly half the weight of steel rings, rather than the usual lightweight-ring compromise where you trade grip for grams.\u003c\/p\u003e\u003cp\u003eOn a mountain rifle or a backcountry gun this is one of the cheapest ounces you will ever buy back, and unlike shaving weight off a barrel or a stock it costs you nothing in performance.\u003c\/p\u003e\u003cp\u003eHeight is the decision most people get wrong. Too low and the objective bell fouls the barrel or the base; too high and you lose a consistent cheek weld and start chasing your eye position under recoil. The correct answer is the lowest height that clears your objective with a little margin, checked against your stock comb rather than guessed. Nightforce offers more height options in 30mm than in 34mm, which makes this the easier tube diameter to get exactly right.\u003c\/p\u003e\u003cp\u003eScrew count is the other choice: four screws is Nightforce's own recommendation for most applications, with six available when you want substantially more clamping force. Whichever you pick, remember it constrains later accessory purchases — a top-half bubble level has to match the screw pattern of the ring it replaces.\u003c\/p\u003e","brand":"Nightforce","offers":[{"title":"Low (.885)","offer_id":43019617861703,"sku":"A118","price":170.0,"currency_code":"USD","in_stock":true},{"title":"Medium (1.00)","offer_id":43019617894471,"sku":"A101","price":170.0,"currency_code":"USD","in_stock":true},{"title":"High (1.125)","offer_id":43019617927239,"sku":"A107","price":170.0,"currency_code":"USD","in_stock":true},{"title":"X-High (1.375)","offer_id":43019617960007,"sku":"A110","price":170.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8250\/4519\/files\/nightforce_1.00_med_ultralite_ring_set_180x180__26686.jpg?v=1785358329"},{"product_id":"nightforce-ultralite-ring-set-34mm-4-bolt","title":"Nightforce UltraLite Ring Set - 34mm (4 Bolt)","description":"\u003cp\u003eNightforce is unusually direct about the four-screw version: it will provide a lifetime of service for most applications. That is worth taking at face value rather than reflexively buying more fasteners. Four screws is not the budget option in this line — it is the default, and the six-screw exists for a narrower set of problems.\u003c\/p\u003e\u003cp\u003eWhat you get for choosing it is a simpler installation with fewer fasteners to torque evenly, and slightly less weight on a rifle where the whole point of these rings is weight. The construction is identical either way: hard anodized 7075-T6 aluminum bodies with titanium crossbolts and jaws, which is how they hold like steel while weighing about half as much.\u003c\/p\u003e\u003cp\u003eThe 34mm tube is where this matters most. Large-tube scopes are heavier and have bigger objective bells, so they punish a mount that flexes and they demand more thought about ring height. Getting the rings light without giving up rigidity is exactly the problem this design was drawn to solve.\u003c\/p\u003e\u003cp\u003eOne planning note: Nightforce offers fewer height options in 34mm than in 30mm, so measure your objective clearance before ordering rather than assuming the height you want exists. And if you later want a bubble-level top half, it must match this four-screw pattern.\u003c\/p\u003e","brand":"Nightforce","offers":[{"title":"Med (1.00)","offer_id":43019617992775,"sku":"A223","price":190.0,"currency_code":"USD","in_stock":true},{"title":"High (1.125)","offer_id":43019618025543,"sku":"A224","price":190.0,"currency_code":"USD","in_stock":true},{"title":"X-Hi (1.375)","offer_id":43019618058311,"sku":"A226","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8250\/4519\/files\/nightforce_1.00_med_ultralite_ring_set_180x180__38595.jpg?v=1785358331"},{"product_id":"nightforce-ultralite-ring-set-34mm-6-bolt","title":"Nightforce UltraLite Ring Set - 34mm (6 Bolt)","description":"\u003cp\u003eNightforce puts a number on this one, which is rare and useful: the six-screw version delivers roughly fifty percent more clamping force than the four-screw. That is the entire reason to buy it, and it tells you who should. If your rifle and load are ordinary, Nightforce's own guidance is that four screws will last a lifetime. If you are running a heavy magnum, hanging a large 34mm scope well out over the rail, or building something that absolutely cannot shift zero between now and the end of the season, the extra clamping is cheap insurance.\u003c\/p\u003e\u003cp\u003eSpreading the load over six fasteners also distributes pressure more evenly around the tube, which matters on the thinner-walled sections of a long scope body. The construction is unchanged from the four-screw: hard anodized 7075-T6 aluminum bodies with titanium crossbolts and jaws, giving steel-class holding power at around half the weight of steel rings.\u003c\/p\u003e\u003cp\u003eTwo practical consequences of choosing six screws. First, torquing them evenly takes more care — work in a cross pattern and go around more than once, because uneven clamping on a scope tube is its own problem. Second, the screw pattern is not interchangeable: a six-screw ring set requires six-screw top halves, so if you later add a bubble-level top half or a rail accessory platform, it has to be the six-screw version.\u003c\/p\u003e\u003cp\u003eCheck available heights against your objective clearance before ordering; the 34mm range is narrower than the 30mm range.\u003c\/p\u003e","brand":"Nightforce","offers":[{"title":"High (1.125)","offer_id":43019618091079,"sku":"EOL082034H6","price":215.0,"currency_code":"USD","in_stock":false},{"title":"X-Hi (1.375)","offer_id":43019618123847,"sku":"EOL082034XH6","price":215.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8250\/4519\/files\/nightforce_1.00_med_ultralite_ring_set_180x180__68186.jpg?v=1785358332"},{"product_id":"nightforce-30mm-top-half-ring-w-level-bubble","title":"Nightforce 30mm Top Half Ring w\/Level Bubble","description":"\u003cp\u003eCant is the error nobody sees themselves make. If the rifle is rolled a few degrees off vertical, your elevation dial no longer moves the bullet straight up — part of it goes sideways, and the further you dial, the further left or right you push. At close range it hides inside the group. At distance it becomes a miss you will blame on wind.\u003c\/p\u003e\u003cp\u003eThis part solves it by replacing the top half of a ring you already own with one carrying an integrated bubble. That is the design decision worth understanding: the level is not bolted onto the rail out ahead of the scope, and it does not consume rail space you might want for a rangefinder or a night vision clip-on. It sits on the tube, in the lower edge of your vision as you settle behind the glass, where you will actually glance at it before the shot rather than after.\u003c\/p\u003e\u003cp\u003eBecause it is a direct top-half swap, installation is a matter of removing the existing top ring and fitting this one — no re-zeroing the rifle, no shimming, no repositioning the scope in the rings.\u003c\/p\u003e\u003cp\u003eThis is the 30mm version. Tube diameter has to match your scope, and the screw pattern has to match the ring base it is mating to, so check both before ordering — a 30mm level will not close around a 34mm tube, and a 4-screw top will not line up on a 6-screw bottom.\u003c\/p\u003e","brand":"Nightforce","offers":[{"title":"Default Title","offer_id":43019618189383,"sku":"A128","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8250\/4519\/files\/nightforce_ring_cap_bubble_level__57208.jpg?v=1785358334"},{"product_id":"nightforce-34mm-top-half-ring-w-level-bubble-4-screw","title":"Nightforce 34mm Top Half Ring w\/Level Bubble, 4 Screw","description":"\u003cp\u003eA bubble level earns its place on a rifle the moment you start dialing elevation for distance. Rifle cant tilts the entire adjustment axis, so a turret correction that should lift the bullet straight up instead pushes it diagonally — and the error scales with how much you dial. Shooters who cannot explain their horizontal stringing at distance are very often looking at a cant problem rather than a wind problem.\u003c\/p\u003e\u003cp\u003eRather than adding hardware, this replaces the top half of a ring you already have. The bubble ends up on the scope tube itself, low in your sight picture, which is the difference between a level you check and a level you own. Rail-mounted levels sit forward and out of the natural line of sight, and they compete for the same rail real estate as a rangefinder or clip-on.\u003c\/p\u003e\u003cp\u003eThe swap does not disturb the scope's position in the rings, so your zero survives the installation.\u003c\/p\u003e\u003cp\u003eThis is the 34mm, 4-screw version. Four-screw is the standard Nightforce clamping arrangement and is entirely sufficient for normal centerfire recoil — fewer fasteners to torque and fewer to keep track of in the field. The screw count is not a preference, though: it must match the ring bottom you are mating to. If your rings are 6-screw, order the 6-screw version instead.\u003c\/p\u003e","brand":"Nightforce","offers":[{"title":"Default Title","offer_id":43019618353223,"sku":"A270","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8250\/4519\/files\/nightforce_ring_cap_bubble_level__72916.jpg?v=1785358340"},{"product_id":"nightforce-34mm-top-half-ring-w-level-bubble-6-screw","title":"Nightforce 34mm Top Half Ring w\/Level Bubble, 6 Screw","description":"\u003cp\u003eThe six-screw version of the top-half level, and the reason to want it is clamping distribution rather than raw strength. Spreading the same clamping load across six fasteners instead of four means each one carries less, the pressure around the tube is more even, and there is less chance of a localized high spot on a scope body. On heavy-recoiling rifles, on heavy scopes with a lot of mass hanging out front, and on rifles that get transported hard, that even grip is what keeps a scope from creeping in its rings over a season.\u003c\/p\u003e\u003cp\u003eThe level itself does the job every dialed shot depends on. Rifle cant redirects turret adjustment off the vertical, so elevation you dial for distance partly becomes windage you never intended. The further out you shoot, the more that hidden error costs, and it is almost impossible to detect by feel — a rolled rifle feels normal behind the eyepiece.\u003c\/p\u003e\u003cp\u003ePutting the bubble in the top half of a ring rather than on the rail keeps it in your peripheral vision at the moment of the shot and leaves the rail free for a rangefinder or clip-on. Swapping it does not move the scope, so the rifle's zero is unaffected.\u003c\/p\u003e\u003cp\u003ePractical note: six-screw is not an upgrade you can simply choose. The top half has to mate to a six-screw ring bottom. Count the screws on your existing rings before ordering.\u003c\/p\u003e","brand":"Nightforce","offers":[{"title":"Default Title","offer_id":43019618484295,"sku":"A272","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8250\/4519\/files\/nightforce_ring_cap_bubble_level__49657.jpg?v=1785358345"},{"product_id":"nf-eyepiece-end-flip-up-lens-caps-all-nxs-43mm","title":"NF Eyepiece end, Flip-up lens caps - All NXS 43mm","description":"\u003cp\u003eThe eyepiece is the lens you cannot fix in the field. Grit on the objective is annoying; grit on the ocular sits inches from your eye, magnified by nothing, smearing the image you are trying to read a target through — and wiping it with a shirt tail is how fine scratches get into a coating that cost real money.\u003c\/p\u003e\u003cp\u003eThis is a flip-up rather than a slip-on. The cap stays attached to the scope and hinges clear, which matters more than it sounds: a cap you remove is a cap you set down on a shooting mat, forget, and drive away from. A hinged cap is still there at the end of the stage. It also means the scope goes from covered to ready with a thumb, without breaking your position.\u003c\/p\u003e\u003cp\u003eNightforce has these built by Tenebraex to their own dimensions, which is why they seat properly instead of the loose, universal-fit compromise you get from a generic cap. The shell is a high-strength plastic blend chosen for impact durability and for holding its properties across extreme temperature swings — the practical failure mode of cheap caps is going brittle in real cold and cracking off the hinge.\u003c\/p\u003e\u003cp\u003eFitment is the thing to get right. Nightforce specifies eyepiece caps by riflescope model rather than by a lens measurement, because the eyepiece housing differs between families. Match your exact scope model before ordering, and note this is the eyepiece cap only — objective caps are sold separately.\u003c\/p\u003e","brand":"Nightforce","offers":[{"title":"Default Title","offer_id":43019619303495,"sku":"A473","price":45.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8250\/4519\/files\/Nightforce_FlipCaps_hires_11__73936.jpg?v=1785358370"},{"product_id":"nf-objective-end-flip-up-lens-caps-nxs-50mm","title":"NF Objective end, Flip-up lens caps - NXS 50mm","description":"\u003cp\u003eThe objective is the lens that takes the abuse. It faces forward into rain, blowing dust, and the debris a muzzle brake kicks back over the barrel, and on a rifle carried muzzle-down it is the first thing to meet a branch. It is also the larger and more expensive piece of glass in the scope.\u003c\/p\u003e\u003cp\u003eA flip-up cap is the answer for a rifle that is actually being used rather than stored. It hinges out of the way in one motion, so the scope is covered right up until the moment you are behind it, and it is still attached afterward — no cap in a pocket, no cap left on the bench. That matters most on the objective end, where slip-on covers get knocked loose in a scabbard or a pack without you noticing.\u003c\/p\u003e\u003cp\u003eNightforce contracts these to Tenebraex and specifies the dimensions themselves, which is the difference between a cap that seats with a positive click and a universal cap that rattles or works loose. The body is a high-strength plastic blend selected for impact resistance and for staying flexible rather than brittle across a wide temperature range.\u003c\/p\u003e\u003cp\u003eWorth knowing: this size is not NXS-only. Nightforce lists this objective cap as fitting 50mm NX8, NXS, and SHV riflescopes, so it carries across three families. It is sold individually — the eyepiece cap is a separate purchase.\u003c\/p\u003e","brand":"Nightforce","offers":[{"title":"Default Title","offer_id":43019619336263,"sku":"A474","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8250\/4519\/files\/Nightforce_FlipCaps_hires_21__21134.jpg?v=1785358371"},{"product_id":"nf-objective-end-flip-up-lens-caps-all-56mm","title":"NF Objective end, Flip-up lens caps - All 56mm","description":"\u003cp\u003eBig objectives are bought for one reason — light — and they pay for it by presenting the largest, most exposed piece of glass on the rifle. A 56mm front lens catches more rain, collects more dust, and costs the most to have refinished if something drags across the coating. It is the single element on the scope most worth covering.\u003c\/p\u003e\u003cp\u003eThe flip-up design solves the problem that slip-on covers create. A cover you have to pull off is one you either leave behind or fumble at the wrong moment; this one hinges clear and stays attached, so the glass is protected in transit and the scope is ready with a thumb flick. On a rifle riding in a scabbard or lashed to a pack, that permanence is the whole point.\u003c\/p\u003e\u003cp\u003eThese are made by Tenebraex to Nightforce's own dimensions rather than bought in as a universal part, which is why the fit is positive instead of approximate. The shell is a high-strength plastic blend picked for impact durability and for surviving extreme temperature swings without going brittle.\u003c\/p\u003e\u003cp\u003eThis is the broadest-fitting cap Nightforce makes: the 56mm objective is common across the ATACR, BEAST, NXS, and SHV families, so one part covers a lot of the lineup. It is sold as a single cap, not paired with an eyepiece cover.\u003c\/p\u003e","brand":"Nightforce","offers":[{"title":"Default Title","offer_id":43019619369031,"sku":"A468","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8250\/4519\/files\/Nightforce_FlipCaps_hires_21__79881.jpg?v=1785358373"},{"product_id":"moa-rifles-scope-coat-large","title":"MOA Rifles Scope Coat - Large","description":"\u003cp\u003e\u003cstrong\u003eMOA Rifles Scope Coat — Large\u003c\/strong\u003e — A premium neoprene scope cover for serious hunters and shooters who protect their investment. The \u003cstrong\u003eMOA Rifles Scope Coat\u003c\/strong\u003e is built from \u003cstrong\u003e6mm neoprene\u003c\/strong\u003e — thick, form-fitting, and tough enough to absorb the bumps, scrapes, and rain that come with hard-use field rifles.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy a Scope Cover Matters\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOptics worth $1,000–$3,000+ are riding on your rifle every time you go afield. A quality cover protects your glass from \u003cstrong\u003eobjective lens fogging\u003c\/strong\u003e, \u003cstrong\u003edust and debris on the ocular\u003c\/strong\u003e, \u003cstrong\u003ebrush scratches\u003c\/strong\u003e when pushing through timber, and \u003cstrong\u003ehard impacts\u003c\/strong\u003e in a truck or scabbard. The MOA Scope Coat is the protection layer that lives on the rifle until the shot.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLarge Size — What It Fits\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for \u003cstrong\u003e50–56mm objective\u003c\/strong\u003e riflescopes\u003c\/li\u003e \u003cli\u003eCompatible with \u003cstrong\u003eNightforce ATACR and NXS\u003c\/strong\u003e series scopes\u003c\/li\u003e \u003cli\u003eAlso fits most other 30mm tube scopes with 50–56mm objectives in this class\u003c\/li\u003e \u003cli\u003e\u003cem\u003eSee our Medium size if your objective is 44mm or smaller\u003c\/em\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003e6mm neoprene\u003c\/strong\u003e — thick, flexible, impact-absorbing\u003c\/li\u003e \u003cli\u003eStretches to conform to your scope's profile — no loose material, no rattling\u003c\/li\u003e \u003cli\u003eProvides a barrier against moisture, dust, and abrasion\u003c\/li\u003e \u003cli\u003eSlides on and off quickly without tools or fumbling\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eA straightforward, effective solution for protecting high-end glass on a working hunting rifle. Available at The Extreme Store in Redmond, Oregon.\u003c\/em\u003e\u003c\/p\u003e","brand":"MOA Rifles","offers":[{"title":"Default Title","offer_id":43019622154311,"sku":"SCVLG","price":25.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0693\/8250\/4519\/files\/scopecover__84386.jpg?v=1785358420"}],"url":"https:\/\/extremestore.us\/collections\/scope-accessories.oembed","provider":"The Extreme Store","version":"1.0","type":"link"}